General information 1-73
7500-XXX
Exit 2 transport roll assembly and media exit roll assembly
The exit 2 transport roll assembly and exit 2 media exit roll assembly are rollers used to eject media to the exit 2
standard bin or to feed media to the duplex.
Tools required for service
Flat-blade screwdriver
#1 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic
#2 Phillips screwdriver, magnetic short-blade
Needle nose pliers
Diagonal side cutters
Spring hook
Analog or digital multi meter
Parallel wrap plug 1319128
Twinax/serial debug cable (#1381963)
Coax/serial debug cable (#1381964)
5.5 mm hexdriver (magnetic)
Rear
Exit interface
card asm
Switch (exit 2 left
door interlock)
Exit 2 media exit roll asm
Sensor (standard bin full exit 2)
Exit 2 media transport roll asm
Exit 2 drive motor
Media shift motor
Sensor (exit 2)
Sensor (exit 2 media shift HP)
To Next Page
Loading...
