Lexmark X850E - 2000-Sheet Dual Input (TTM)-Media Feed Unit Assembly Removal (Tray 4)

Repair information 4-239
7500-XXX
2000-sheet dual input (TTM)–media feed unit assembly removal (tray 4)
1. Remove the tray 3 assembly. See “2000-sheet dual input (TTM)–tray 3 assembly removal” on
page 4-217.
2. Remove the tray 4 assembly. See “2000-sheet dual input (TTM)–tray 4 assembly removal” on
page 4-216.
3. Remove the tray 4 transport assembly. See “2000-sheet dual input (TTM)–tray 4 media transport
assembly removal” on page 4-229.
4. Disconnect the two connectors from the media feed unit assembly (A).
5. Remove two screws securing the media feed unit assembly (A).
Note: Removing the media tray 1 and media tray 2 in the printer makes removing the media feed unit
assembly (A) rear screws easier.
Connectors
A
A
B
Front