4-154 MFP Service Manual
7500-XXX
Scanner PS card assembly removal
1. Remove the ADF unit assembly. See “ADF unit assembly removal” on page 4-159.
2. Remove the large platen glass. See “Large platen glass removal” on page 4-142.
3. Remove the CCD card/lens assembly. See “CCD card/lens assembly removal” on page 4-146.
4. Remove all connections from the scanner PS card assembly (A).
5. Remove the three screws securing the bracket (B) to the scanner unit assembly.
6. Remove the bracket (B).
7. Remove the three screws securing the scanner PS card assembly (A) to the bracket (B).
8. Remove the scanner PS card assembly (A).
Connector
A
B
To Next Page
Loading...
