Lexmark X850E - 2000-Sheet Dual Input (TTM)-Sensor (Media Level) Removal

4-254 MFP Service Manual
7500-XXX
2000-sheet dual input (TTM)–sensor (media level) removal
1. Remove the media feed unit assembly. See “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 3)” on page 4-243 or “2000-sheet dual input (TTM)–media feed unit assembly
removal (tray 4)” on page 4-239.
2. Disconnect the connector from the sensor (media level) (A).
3. Release the hooks securing the sensor (media level) (A) to the media feed unit assembly.
4. Remove the sensor (media level) (A).
Front
Harness
Hooks
Lower view
A