Lexmark X850E - Page 663

Repair information 4-285
7500-XXX
8. Disconnect the connector of the harness from duplex drive motor assembly (D) to the duplex main cable
assembly.
9. Release the harness from the clamps of the duplex unit assembly.
10. Remove the three screws securing the bracket (E) to the duplex unit assembly.
11. Remove the bracket (E).
12. Remove the two duplex drive gears 33/74T (G).
13. Release the hooks securing the three duplex drive gears 28T (F) to the duplex unit assembly.
14. Remove the three duplex drive gears 28T (F).
E
Rear
F
F
Hook
F
G
G
Clamps
D
Connector