To Next Page
L
lindsay47Aug 28, 2025
What to do if Lexmark XM3150 displays 'Scanner automatic feeder cover open'?
- PPamela HernandezAug 28, 2025
If your Lexmark All in One Printer displays a 'Scanner automatic feeder cover open' message, close the ADF cover.
What to do if Lexmark XM3150 displays 'Scanner automatic feeder cover open'?
If your Lexmark All in One Printer displays a 'Scanner automatic feeder cover open' message, close the ADF cover.
What does 'Maintenance kit low' mean for Lexmark XM3150 All in One Printer?
If your Lexmark All in One Printer displays a 'Maintenance kit low' message, it indicates that you may need to order a maintenance kit.
What to do if Lexmark XM3150 All in One Printer displays 'Fax memory full'?
If your Lexmark All in One Printer displays a 'Fax memory full' message, from the printer control panel, touch Continue to clear the message.
What to do if Lexmark All in One Printer displays 'Reinstall missing or unresponsive imaging unit'?
If your Lexmark All in One Printer displays a 'Reinstall missing or unresponsive imaging unit' message: * Check if the imaging unit is missing. If missing, install the imaging unit. * If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.
What does 'Cartridge very low, [x] estimated pages remain' mean on Lexmark All in One Printer?
If your Lexmark All in One Printer displays a 'Cartridge very low, [x] estimated pages remain' message, you may need to replace the toner cartridge very soon.
What does 'Imaging unit very low, [x] estimated pages remain' mean for Lexmark XM3150 All in One Printer?
If your Lexmark All in One Printer displays an 'Imaging unit very low, [x] estimated pages remain' message, you may need to replace the imaging unit very soon.
What to do if Lexmark All in One Printer shows 'Replace cartridge, 0 estimated pages remain'?
If your Lexmark All in One Printer shows a 'Replace cartridge, 0 estimated pages remain' message, replace the toner cartridge to clear the message and continue printing.
What to do if Lexmark All in One Printer displays 'Insufficient memory, some Held Jobs were deleted'?
If your Lexmark All in One Printer displays an 'Insufficient memory, some Held Jobs were deleted' message, from the printer control panel, touch Continue to clear the message.
What does 'Maintenance kit very low, [x] estimated pages remain' mean for Lexmark XM3150 All in One Printer?
If your Lexmark All in One Printer displays a 'Maintenance kit very low, [x] estimated pages remain' message, you may need to replace the maintenance kit very soon.
What to do if Lexmark XM3150 displays 'Insufficient memory, some held jobs will not be restored'?
If your Lexmark All in One Printer displays an 'Insufficient memory, some held jobs will not be restored' message: * From the printer control panel, touch Continue to clear the message. * Delete other held jobs to free up additional printer memory.
Information about Class I laser product certification and internal Class IIIb laser.
General safety precautions, handling unauthorized parts, and disassembly risks.
Explains standard notes, warnings, and caution statements used in the manual.
Lists revisions made to the manual with dates.
Information on printing specialty media, available online.
Advice on selecting, storing, and using different paper types for optimal printing.
Information on printer memory types, data storage, and how to erase data.
Lists the necessary tools for performing printer maintenance and repairs.
Lists main troubleshooting categories and their starting page numbers.
Provides specific checks and procedures for various print quality problems.
Information on common paper jams, their locations, and clearing procedures.
Explains the functions of the printer's control panel buttons and indicator lights.
Details the functionality of the printer's home screen buttons and icons.
Information on accessing and using the printer's diagnostic functions for troubleshooting.
Tests to diagnose and verify the functionality of the printer's hardware components.
Tests related to the duplex printing functionality.
Tests related to the finisher's stapling and feeding functions.
Configuration options for printer settings.
Settings for Electrophotographic process adjustments.
Options for printing various printer reports.
Allows the printer to operate in a limited mode during known issues.
Restores printer settings to network or base printer defaults.
Manually registers flatbed and ADF for scanner unit alignment.
Disables the MFP scanner if it is malfunctioning.
General tips for safe and effective part removal and replacement.
Details printer memory types, data storage, and parts capable of storing memory.
Instructions for safely handling parts sensitive to electrostatic discharge.
Procedures for replacing the controller board and control panel.
Procedures for removing components located on the left side of the printer.
Step-by-step instructions for removing the printer's left cover.
Step-by-step instructions for removing the printer's right cover.
Procedure for removing the left front mount component.
Procedure for removing the right front mount component.
Steps to remove the printer's power supply unit.
Procedure for removing the power supply shield.
Instructions for removing the printer's dust cover.
Procedure for removing the rear exit door.
Step-by-step instructions for removing the printer's rear cover.
Step-by-step instructions for removing the printer's top cover.
Procedure for removing the ADF separator roll.
Procedure for removing the pick roller from the tray.
Steps to remove the staple finisher option from the printer.
Identifies external components of the printer with a front view diagram.
Diagram and list of connectors on the printer's controller board.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 6.5 s |
| Print speed (black, normal quality, A4/US Letter) | 47 ppm |
| All-in-one functions | Copy, Fax, Print, Scan |
| Color all-in-one functions | Scan |
| Digital sender | No |
| Maximum duty cycle | 150000 pages per month |
| Recommended duty cycle | 2000 - 15000 pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | - DPI |
| Copy speed (black, normal quality, A4) | 47 cpm |
| Scan speed (black) | 48 ppm |
| Scan speed (color) | 32 ppm |
| Duplex scan speed (black) | 21 ppm |
| Duplex scan speed (color) | 14 ppm |
| Optical scanning resolution | 600 x 1200 DPI |
| Faxing | Mono faxing |
| Modem speed | 33.6 Kbit/s |
| Total input capacity | 650 sheets |
| Total output capacity | 250 sheets |
| Maximum input capacity | 2300 sheets |
| Multi-Purpose tray input capacity | 100 sheets |
| Envelopes sizes | 7 3/4, 9, 10, DL |
| Maximum print size | 216 x 356 mm |
| Paper tray media types | Card stock, Envelopes, Labels, Plain paper, Transparencies |
| Non-ISO print media sizes | Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| JIS B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Display | LCD |
| Control type | Touch |
| Product color | Grey, White |
| Display diagonal | 7 \ |
| Market positioning | Business |
| Direct printing | - |
| Standard interfaces | Ethernet, USB 2.0 |
| Optional connectivity | Parallel, Serial (RS-422), Wireless LAN |
| Internal memory | 1024 MB |
| Maximum internal memory | 3072 MB |
| Sound pressure level (copying) | 56 dB |
| Sound pressure level (printing) | 55 dB |
| Power consumption (average operating) | - W |
| Operating altitude | 0 - 2896 m |
| Operating temperature (T-T) | 16 - 32 °C |
| Operating relative humidity (H-H) | 8 - 80 % |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 479 mm |
|---|---|
| Width | 499 mm |
| Height | 561 mm |
| Weight | 23600 g |
