D9U001ES2-0101_05
107
17.11.11 Technical Specications
Parameter Value
i-Drive Power wheel diameter 21 cm
Max. fast forward speed (at ground, loaded) 4,43 km/h (±15%)
Max. forward speed (at ground, loaded) 2,16 km/h (±15%)
Max. reverse speed (at ground, loaded) 2,16 km/h (±15%)
Max. angle of ascent 6°
17.11.12 Electrical specication
Parameter Value
Input Voltage, Frequency 230 V AC, 50/60 Hz
127 V AC, 50/60 Hz
120 V AC, 50/60 Hz
110 V AC, 50/60 Hz
100 V AC, 50/60 Hz
Batteries Voltage 12 V DC, Capacity: 9 Ah
Maximum Power Input 300 W
Fuse
Version 230 V
Version 127 V
Version 120 V
Version 110 V
Version 100 V
2 x T1,6A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
2 x T3,15A L 250V
17.11.13 i-Drive Power Maintenance
Periodical maintenance of the i-Drive Power must be done by qualied service technician or authorized service organization at least
once a year. To continue maintenance please see chapter Maintenance.
Service technician must check the following:
► accumulator status and eventual replacement of the accumulator (after maximum of three years of duty)
► shock absorber function
► i-Drive Power wheel – replace if necessary
► lifting mechanism – grease if necessary
► cables, control elements – replace if necessary
► i-Drive Power function
To Next Page
Loading...
Need help?
General
