LINET Sprint 200

D9U001ES2-0101_05 79
Status (Pop-up window)
Meaning How to change the status
Scales fault (fault number starts with
letter F).
Contact service department
approved by manufacturer.
Fault of the communication between
scales system components.
Contact service department
approved by manufacturer.
Fault of the Scales and Bed Exit Alarm
Monitoring Control Panel. This fault can
be caused by an object pushing on the
keyboard or by a long press on a button
of the Control Panel lasting more than
60s or by the damaged keyboard.
Contact service department
approved by manufacturer if
cause of this fault cannot be
removed from the keyboard.
User is asked to set the time if Sprint 200
with scales was without inserted batte-
ries.
Set the time in the Settings Menu
(see „16.9 Settings Menu“ on the
page 86).
Sprint 200 stretcher requires the periodic
preventive maintenance (PPM). This
noti cation apears each 6 hours if the
periodic preventive maintenance is still
required.
Contact service department
approved by manufacturer.
15.8 Pop-up windows connected with Scales Control
Pop-up windows are indicated on the display of Scales and Bed Exit Alarm Control Panel.