LINET Sprint 200 User Manual

D9U001ES2-0101_05 127
For safe and gentle cleaning:
► Do not use any strong acids or bases (optimum pH range 6 - 8).
► Exclusively use detergents that are suitable for cleaning medical equipment.
► Do not use abrasive powders, steel wool, or other materials and cleaning agents that might damage the compatible
mattress.
► Never use any corrosive or caustic detergents.
► Never use detergents that deposit calcium carbonate.
► Never use detergents with solvents that might a󰀨ect the structure and consistency of the plastics (benzene, toluene, ace-
tone, etc.).
► Observe local directives regarding infection control.
► Make sure any cleaning agent used is approved by:
■ the facility in which the compatible mattress is to be used.
■ by the environmental protection agency of the country in which the compatible mattress is to be used.
20.1 Cleaning (Sprint 200)
Prepare for cleaning as follows:
► Put the Mattress Support Platform in the highest position.
► Adjust the Backrest and Thighrest/Foot section so that the reverse sides are accessible.
► Move the stretcher to the location where it will be cleaned.
► Lock the brakes on the stretcher.
20.1.1 Cleaning before Changing Patients
Clean the following stretcher parts:
■ All control elements for adjusting the stretcher
■ All handles
■ Head End and Foot End
■ Siderails (in highest position)
■ Freely accessible mattress surface
■ Accessory rails
■ All Mattress Support Platform covers
■ Plastic undercarriage covers
■ Column covers
■ Mattress on all sides
■ Freely accessible metal parts of Mattress Support Platform
■ Infusion stand sleeve tting
■ Bumpers
■ Castors
■ Brakes
20.1.2 Daily Cleaning
Clean the following stretcher parts:
■ All control elements for adjusting the stretcher
■ All handles
■ Head End and Foot End
■ Siderails (in highest position)
■ Freely accessible mattress surface
■ Accessory rails

LINET Sprint 200 Specifications

General

Brand	LINET
Model	Sprint 200
Category	Medical Equipment
Language	English