D9U001ES2-0101_0588
To enter Settings Menu:
► Press Bed Exit Alarm Monitoring Button, PAUSE Button and ON/OFF Button at the same time for 3s.
Settings Menu is opened only for 60s unless adjustment follows.
To select TIME AND DATE:
► Use ON/OFF Button or PAUSE Button to select the line
TIME DATE SETTING.
► Press WEIGHT/CLEAR Button to con rm the selection.
► Use ON/OFF Button and PAUSE Button to select the
parameter to be changed.
► Press WEIGHT/CLEAR Button to con rm the selection.
► Use ON/OFF Button and PAUSE Button to set the requi-
red value.
► Press WEIGHT/CLEAR Button to con rm the change.
To leave the Settings Menu:
► Press ZERO/T Button.
Fig. Settings Menu (TIME DATE SETTING) Fig. TIME DATE SETTING Menu
16.9.2 Time and Date Format Settings
Parameter Meaning
TIME FORMAT 12 hours or 24 hours
DATE FORMAT day-month-year or
month-day-year or year-
-month-day
DST SUPPORT daylight saving time
(ON or OFF)
DST START day when the daylight
saving time starts
DST END day when the daylight
saving time ends
To Next Page
Loading...
Need help?
General
