LINET Sprint 200

D9U001ES2-0101_0536
8 Use and Storage Conditions
Respect values of the parameters connected with environment conditions in the chapter Technical Specication during
use and storage of the product.
Sprint 200 is not suitable for indoor environments containing ammable gases (except oxygen cylinders).
Sprint 200 with scales or with i-Drive Power is suitable for continuous operation.
Sprint 200 is designed for use in rooms for medical purposes. Electrical installations connected to the Sprint 200 with scales or with
i-Drive Power must therefore meet local norms laying down the necessary conditions for electrical installations.
To increase the safety of electrical equipment:
► Disconnect the Sprint 200 with scales or with i-Drive Power from the mains in exceptional cases (i.e. lightnings,
earthquake).
9 Scope of Delivery and Product Variants
9.1 Delivery
► Upon receipt, check that the shipment is complete as specied on the delivery note.
► Notify the carrier and supplier of any deciencies or damages immediately as well as in writing or make a note on the
delivery note.
9.2 Scope of Delivery
■ Sprint 200 Emergency Stretcher
■ Instructions for Use
DANGER!
Danger to life due to electric shock!
To ensure the stretcher’s class I protection against electric shocks:
► Ground the mains.
► Use exclusively Hospital Grade or Hospital Only receptacles for grounding.
WARNING!
Risk of damaging the product due to incorrect storage!
► Remove the 4 batteries from the Battery Box before storage of the Sprint 200 with scales!