D9U001ES2-0101_05
45
The stretcher includes rmware that can be updated only by an authorised service technician.
This rmware is protected against unauthorised access by mechanical housing (tool is needed to access), by seal (com-
ponents with processor are sealed), by exclusive compatibility with an authorised software tool and by check of compati-
bility of the new rmware with the stretcher.
10.5 Firmware (only Sprint 200 with scales or with i-Drive Power)
Attachment plug is means of connecting and disconnecting Sprint 200 with scales or with i-Drive Power from the mains.
Power Supply Cord should be safely wound around the Accessory Rail or safely placed in the Storage Box when it is not
connected to the mains.
11 Power Supply Cord (only Sprint 200 with scales or with i-
-Drive Power)
WARNING!
Where the integrity of the external protective conductor in the installation or its arrangement is in doubt
► Use the other power source that is not in doubt.
WARNING!
Inappropriate handling of the power supply cord, e. g. by kinking, shearing or other mechanical damages is
hazardous!
WARNING!
When routing Power Supply Cord in a Sprint 200 with scales or with i-Drive Power avoid squeezing the cable
between parts of the Sprint 200 with scales or with i-Drive Power!
WARNING!
An additional multiple socket-outlet or extension cord shall not be connected to the Sprint 200 with scales or
with i-Drive Power!
WARNING!
Use exclusively the power supply cord in perfect condition!
► Ensure the power supply cord are not damaged before each use!
WARNING!
Power Supply Cord must not be tightened or stretched during use!
► Ensure the Power Supply Cord hangs loosely between the Sprint 200 with scales or with i-Drive Power and
the wall where the Power Supply Cord is connected to the mains.
WARNING!
It is not possible to use Bed Exit Alarm Monitoring when Sprint 200 with scales is disconnected from the
mains power! No Bed Exit Alarm can be triggered when Sprint 200 with scales is disconnected from the mains
power!
To Next Page
Loading...
Need help?
General
