EasyManuals Logo

LINET Sprint 200 User Manual

LINET Sprint 200
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
D9U001ES2-0101_0538
10 Putting into Service
WARNING!
Risk of injury when working on the stretcher!
Ensure that the castors are locked prior to putting into service and maintenance.
CAUTION!
Material damage due to incorrect putting into service!
Ensure that putting into service is performed exclusively by manufacturer´s customer service or trained hospi-
tal personnel.
CAUTION!
Material damage due to incorrect use!
Do not use pedals for lifting or lowering if the stretcher undercarriage is not in horizontal position!
NOTE For safe, easy handling, LINET ® recommends having two technicians put the stretcher into service.
Set up the stretcher as follows:
Unpack the stretcher.
Check the delivery (see Scope of Delivery and Product Variants).
Ensure that all of the required mechanisms are available on site.
Raise siderails up.
Install accessories.
Set up the stretcher exclusively on a suitable oor surface (see Transport).
HOOKS ON THE ACCESSORY RAIL (optional)
If the stretcher is equipped with accessory rail on the head end / foot end hooks on the accessory rail are delivered in the safety
position. In order to use the hooks remove them and place them on the accessory rail from the outer side (reversely).

Table of Contents

Other manuals for LINET Sprint 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LINET Sprint 200 and is the answer not in the manual?

LINET Sprint 200 Specifications

General IconGeneral
BrandLINET
ModelSprint 200
CategoryMedical Equipment
LanguageEnglish

Related product manuals