D9U001ES2-0101_05
81
1. Display
2. ON/OFF Button with Green Indicator above (lit green indicator - monitoring ON, not lit green indicator - monitoring OFF)
3. PAUSE Button with Green Indicator above (lit green indicator - monitoring PAUSED, not lit green indicator - monitoring
NOT PAUSED)
4. Bed Exit Alarm Monitoring Button with 2 Green Indicators above (lit left green indicator - Inner Zone monitoring activa-
ted, lit right green indicator - Outer Zone monitoring activated)
Fig. Scales and Bed Exit Alarm Monitoring Control Panel (keyboard and display)
1
432
Bed Exit Alarm Monitoring is intended for informing the hospital personnel about highly probable patient´s absence in
ordered position on the Sprint 200 with scales. Bed Exit Alarm Monitoring triggers alarms when it detects that patient is
not present in the expected position.
16 Bed Exit Alarm Monitoring (only Sprint 200 with scales)
WARNING!
It is not possible to use Bed Exit Alarm Monitoring when Sprint 200 with scales is disconnected from the
mains power! No Bed Exit Alarm can be triggered when Sprint 200 with scales is disconnected from the mains
power!
WARNING!
Do not use Bed Exit Alarm Monitoring and do not rely on the acoustic Bed Exit Alarms if no beep sounds after
the activation of the Bed Exit Alarm Monitoring!
To Next Page
Loading...
Need help?
General
