LINET Sprint 200

D9U001ES2-0101_0590
17 Equipment
Product equipment depends on product conguration.
Fig. Accessory Rail with plastic hooks (at head end)
Fig. Accessory Rail with plastic hooks (on side)
17.1 Accessory Rail with plastic hooks
Accessory rail with 4 plastic hooks is intended for hanging accessories.
It is located on the sides of stretcher or at head end / foot end.
Power Supply Cord in safety position must be wound around the Accessory Rail at head end in the case of Sprint 200 with scales
or with i-Drive Power.
Maximum load of the Accessory Rail is 10 kg without leverage.
Maximum load of the plastic hook intended for the Accessory Rail is 2 kg.
CAUTION!
It is not recommended to place the hooks suspended on the accessory rail and the accessories suspended on
these hooks directly above the pedals on the sides of Sprint 200 in order to facilitate the use of pedals during
stretcher height adjustment and the use of brake pedals during stretcher transport!