D9U001ES2-0101_05
123
19.7 Oxygen Bottle Holder
Fig. Two Positions of the Oxygen Bottle Holder at head end
Oxygen Bottle Holder is intended for transporting oxygen bottles with a weight of up to 15 kg and a volume of 5 litres.
Oxygen Bottle Holder can only be used with the specic Sprint 200 conguration enabling the correct placement of the Oxygen
Bottle Holder.
Oxygen Bottle Holder with adapter is located at head end on the left.
WARNING!
Risk of injury with Oxygen Bottle Holder due to incorrect use or due to careless driving!
► Ensure the Oxygen Bottle Holder is correctly tted in correct position.
► It is necessary to place Oxygen Bottle Holder (with or without O2 bottle) before transport to secure transport
position.
► Be aware of people or objects in close proximity when driving or manipulating the stretcher equipped with
Oxygen Bottle Holder.
► Secure the oxygen bottles against falling or involuntary movement with rubber strap.
► Place the Oxygen Bottle Holder on the stretcher by following instructions.
► Ensure the oxygen bottle valve will not get damaged by careless or incorrect manipulation or placement.
CAUTION!
Oxygen Bottle Holder must be placed to the correct position on the left side at head end of the Sprint 200
stretcher during its installation and its removal!
To Next Page
Loading...
Need help?
General
