LINET Sprint 200

D9U001ES2-0101_0582
16.1 Preparation
► Place a patient on the stretcher with suitable mattress.
► Place the patient towards the middle of the stretcher for the correct function of the Bed Exit Alarm Monitoring in Inner
Zone.
1
2
16.2 Displaying
Display shows statuses and settings of the Bed Exit Alarm Monitoring.
1. Indicator of Monitored Zone (Inner Zone or Outer Zone)
2. Status of Bed Exit Alarm Monitoring
Fig. Display description (Bed Exit Alarm
Monitoring)
Indicator Meaning
Inner Zone Monitoring
Outer Zone Monitoring
Status Meaning
Bed Exit Alarm Monitoring is activated and alarms can be triggered.
Bed Exit Alarm Monitoring is deactivated and alarms cannot be triggered.
Bed Exit Alarm Monitoring is PAUSED and alarms cannot be triggered for 15
minutes.
Operator activates Bed Exit Alarm Monitoring without patient on the Sprint 200
with scales. Bed Exit Alarm Monitoring will be activated after patient will be
detected on the stretcher.