To Next Page

To Previous Page

D9U001ES2-0101_0522

WARNING!

An additional multiple socket-outlet or extension cord shall not be connected to the medical electrical system

of Sprint 200 with scales or with i-Drive Power.

WARNING!

Inappropriate handling of the power supply cord of Sprint 200 with scales or with i-Drive Power, e. g. by kin-

king, shearing or other mechanical damages is hazardous!

WARNING!

During specic investigations or treatments, the signicant risks of reciprocal interference posed by Sprint

200 with scales or with i-Drive Power (ME equipment) may occur.

WARNING!

To avoid the risk of electric shock, this equipment must only be connected to a supply mains with protective

earth.

CAUTION!

Risk of material damage due to incorrect use!

► Avoid excessive manipulation with control elements beyond the emergency necessity! Extreme over-

loading will damage the control elements of the Sprint 200!

Table of Contents4
Symbols and Definitions8
Warning Notices8
Types of Warning Notices8
Structure of Warning Notices8
Instructions8
Lists8
Symbols on the Package9
Symbols on the Stretcher10
Scales Indentification Label (Only Sprint 200 with Scales)14
Fig. Example of Scales LW20 Label14
Fig. Warning, Read Instructions for Use14
Fig. Battery Activation Instructions15
Symbols on the Mattress16
Serial Label with UDI18
Sprint 20018
Fig. Position of Serial Label on the Sprint 20018
Acoustic Signalisation (Only Sprint 200 with Scales or with I-Drive Power)19
Definitions19
Abbreviations20
Safety Instructions21
Intended Use of the Sprint 200 Without Scales24
User Population24
Contraindications24
Operator24
Intended Use of the Sprint 200 with Scales25
User Population25
Contraindications25
Operator25
Intended Use of the Sprint 200 Mattresses26
User Population26
Contraindications26
Operator26
Product Description27
Hierarchy of Product Variants27
Sprint 200 with 4-PART MATTRESS SUPPORT PLATFORM28
Fig. Stretcher Overview (Sprint 200 with 4-Part Mattress Support Platform)28
Sprint 200 with 2-PART MATTRESS SUPPORT PLATFORM29
Fig. Stretcher Overview (Sprint 200 with 2-Part Mattress Support Platform)29
Technical Specification30
Identification of Applied Parts (Type B)30
Mechanical Specifications (Sprint 200)30
Electrical Specifications (Only Sprint 200 with Scales or with I-Drive Power)32
Environment Conditions of the Sprint 20033
Electromagnetic Compatibility (Only Sprint 200 with Scales or with I-Drive Power)34
Manufacturer Instructions - Electromagnetic Emissions34
Manufacturer Instructions - Electromagnetic Susceptibility35
Use and Storage Conditions36
Scope of Delivery and Product Variants36
Delivery36
Scope of Delivery36
Sprint 200 Variants37
Putting into Service38
Mattress Support Platform39
Fig. 4-Part Mattress Support Platform39
Fig. 2-Part Mattress Support Platform39
Removal of the Plastic Mattress Support Platform Covers40
Fig. Instructions to Remove the Plastic Mattress Support Platform Covers40
Insertion of the Plastic Mattress Support Platform Covers41
Fig. Instructions to Insert the Plastic Mattress Support Platform Covers41
Patient Restraint Points42
Fig. Eight Patient Restraint Points (4-Part Mattress Support Platform)42
Potential Interconnection (Optional)43
Before Use43
Fig. Potential Equalisation - Male (Head End, Bottom View)43
Fig. Potential Equalisation Connector - Female43
Transport44
Transport Position44
Firmware (Only Sprint 200 with Scales or with I-Drive Power)45
Power Supply Cord (Only Sprint 200 with Scales or with I-Drive Power)45
Fig. Power Supply Cord on the Head End of the Sprint 200 with Scales or with I-Drive Power46
Fig. Hook for Hanging Power Supply Cord46
Connection of the Power Supply Cord47
Fig. Power Supply Cord Leading from the Undercarriage Cover and Wound Around the Accessory Rail47
Indication of the Stretcher Connected to the Mains (Only Sprint 200 with Scales)48
Batteries (Only Sprint 200 with Scales)49
Batteries of the Scales System49
Fig. Position of the Battery Box under the Seat Section of Sprint 200 with Scales49
Battery Activation50
Fig. Battery Box with Battery Isolating Foil under the Seat Section (Bottom View)50
Battery Capacity Status Indicators51
Pop-Up Windows Connected with Battery Capacity Status51
Change of the 4 Batteries in Battery Box52
Fig. Tipping the Battery Box Holder out (Bottom View)52
Fig. Fixation of the Battery Box under the Seat Section (View from Foot End)52
Fig. Battery Box with Cover Fixed with 4 Screws53
Fig. Opened Battery Box with 4 Batteries53
Batteries (Only Sprint 200 with I-Drive Power)54
Manipulation54
Collapsible Siderails55
Siderail Description56
Fig. Manipulation with Collapsible Siderail56
Fig. Positions of both Siderail Release Levers When the Siderail Is Locked57
Fig. Positions of both Siderail Release Levers When the Siderail Is Unlocked57
Fig. Release of the Siderail at Head End and Foot End58
Castor Control59
Fig. Three Pedal Positions (Green Drive Pedal)59
Braked Stretcher60
Forward Movement (Steering)60
Fig. Positions of Brake Pedals60
Fig. Positions of Drive Pedals60
Unrestricted Movement61
Stretcher Positioning61
Backrest61
Fig. Manipulation with Backrest Release Handle62
Fig. Positions of Backrest Release Handles62
Thighrest (Only 4-Part Mattress Support Platform)63
Fig. Position of Thighrest Latch64
Calfrest (Only 4-Part Mattress Support Platform)65
Fig. Calfrest Positioning66
Fig. Catch in the Ratchet-Bar66
Lifting67
Fig. Positions of Lifting Pedals67
Lowering68
Fig. Positions of Head End Lowering Pedals and Foot End Lowering Pedals68
Fig. Positions of Head End Lowering Pedals68
Trendelenburg Position69
Fig. Position of Head End Trendelenburg Pedal (Optional)70
Anti-Trendelenburg Tilt71
Fig. Positions of Foot End Lowering Pedals71
Cardiac Chair Position (Only 4-Part Mattress Support Platform)72
Emergency Backrest Release73
The 2-Part Mattress Support Platform73
Fig. Preparation for Cardiopulmonary Resuscitation (2-Part Mattress Support Platform)73
The 4-Part Mattress Support Platform74
Ergoframe74
Fig. Preparation for Cardiopulmonary Resuscitation (4-Part Mattress Support Platform)74
Scales Control (Only Sprint 200 with Scales)75
Preparation75
Fig. Scales and Bed Exit Alarm Monitoring Control Panel (Keyboard and Display)75
Displaying76
Discrete Mode76
Fig. Display Description (Scales)76
Fig. Discrete Mode76
Taring77
Stretcher Overload78
Stretcher Underload78
Weighing in Tilt78
Calibration of the Zero78
Fig. Sprint 200 with Scales Is Overloaded (Pop-Up)78
Pop-Up Windows Connected with Scales Control79
Basic Technical Parameters of the LW20 Scales System80
Bed Exit Alarm Monitoring (Only Sprint 200 with Scales)81
Fig. Scales and Bed Exit Alarm Monitoring Control Panel (Keyboard and Display)81
Preparation82
Displaying82
Fig. Display Description (Bed Exit Alarm Monitoring)82
Activation83
Monitored Zone83
Pause83
Fig. Bed Exit Alarm Monitoring Button with 2 Green Indicators above83
Bed Exit Alarm84
Deactivation84
Fig. Visual Signalisation of the Bed Exit Alarm on the Display (Yellow Field and Black Symbols)84
Fig. Two Pictures Alternating During Triggered Bed Exit Alarm84
Pop-Up Windows Connected with Bed Exit Alarm Monitoring85
Settings Menu86
Fig. Settings Menu86
Fig. Verification Screen86
Fig. Software and Hardware Versions Screen86
Fig. Settings Menu (TIME and DATE)86
Time and Date Settings87
Fig. TIME and DATE Menu87
Time and Date Format Settings88
Fig. Settings Menu (TIME DATE SETTING)88
Fig. TIME DATE SETTING Menu88
Basic Technical Parameters of the Bed Exit Alarm Monitoring89
Equipment90
Accessory Rail with Plastic Hooks90
Fig. Accessory Rail with Plastic Hooks (on Side)90
Fig. Accessory Rail with Plastic Hooks (at Head End)90
DIN Rail91
Urinary Bag Holders91
Fig. DIN Rail (on Side)91
Fig. Urinary Bag Holder (on Side)91
Undercarriage Cover92
Fig. Storage Space (Undercarriage Cover of the Sprint 200 with I-Drive Power)92
Fig. Storage Space (Undercarriage Cover of the Sprint 200 Without I-Drive Power)92
Straps for Oxygen Bottles93
Fig. Fixation of an Oxygen Bottle on the Undercarriage Cover with Straps for Oxygen Bottles93
Flexidrive (Sprung Retractable Fifth Castor)94
Sprint 200 with Solido 394
Fig. Activation of Fifth Castor94
IV&Drive (Infusion Stands/Pushing Handles)95
Fig. Pair of Foldable Infusion Stands (Head End)95
Fig. Control Ring and Hooks96
Handles97
Foldable Handles97
Fig. Foldable Handles (Foot End)97
Fixed Handles98
Fig. Fixed Handles (at Head End and Foot End)98
Fig. Fixed Handles (at Head End)98
Angle Indicators99
Fig. Angle Indicators99
Mobi-Lift Handle100
Fig. Mobi-Lift Handle100
Fig. Mobi-Lift Handle Control100
I-Drive Power101
Safety Instruction for I-Drive Power101
Specifications of Use101
Manipulation102
Fig. Position of the I-Drive Power Main Control Panel on the IV&Drive102
Fig. I-Drive Power Control Panel103
I-Drive Power Activation/Deactivation104
Fig. Position of the I-Drive Power Mains Switch104
Fig. I-Drive Power Mains Switch with Label104
Powered Drive105
Braking105
Free Drive105
Batteries106
Fault Signalization106
Light Indicators106
Fig. Accumulator Charge Status106
Technical Specifications107
Electrical Specification107
I-Drive Power Maintenance107
Mattress108
Anti-Slip Coating108
Installation of Passive Mattress109
Strap with Side Release Buckles109
Mattresses Specifications111
Sprint 200 with Standard Mattress Support Platform111
Cleaning of Passive Mattress113
General Guidance113
Routine Cleaning and Disinfection114
Complete Cleaning and Disinfection114
Mattress Core114
Accessories115
Infusion Stand116
Fig. Positions for Infusion Stand116
Fig. Infusion Stand (at Head End and Foot End Corners)116
Telescopic Infusion Stand117
Fig. Positions for Telescopic Infusion Stand117
Fig. Telescopic Infusion Stand (at Head End and Foot End Corners)117
Chart Holder118
Fig. Position for Chart Holder118
Monitor Shelf119
Fig. Monitor Shelf (at Foot End)119
Fig. Instruction for Placement of the Monitor Shelf to the Head End and Foot End Corners119
Paper Roll Holder120
Fig. Paper Roll Holder with Two Nibs120
Fig. Two Optional Holders of the Paper Roll Holder120
Fig. Paper Roll Holder (Foot End)121
Storage Box122
Fig. Storage Box (under the Backrest)122
Oxygen Bottle Holder123
Fig. Two Positions of the Oxygen Bottle Holder at Head End123
Fig. Two Positions of the Oxygen Bottle Holder (at Head End on the Left)124
Cleaning and Disinfection125
Cleaning (Sprint 200)127
Cleaning before Changing Patients127
Daily Cleaning127
Complete Cleaning and Disinfection128
Troubleshooting (Sprint 200 Without Scales and Without I-Drive Power)128
Troubleshooting (Sprint 200 with Scales or with I-Drive Power)129
Pop-Up Windows130
Fault Codes131
Maintenance (Sprint 200 Without Scales and Without I- -Drive Power)132
Regular Maintenance132
Spare Parts132
Safety Technical Checks132
Maintenance (Sprint 200 with Scales or with I-Drive Power)133
Regular Maintenance133
Spare Parts133
Safety Technical Checks133
Disposal (Sprint 200 Without Scales and Without I-Drive Power)134
Environment Protection134
Disposal134
Within Europe134
Outside Europe134
Disposal (Sprint 200 with Scales or with I-Drive Power)135
Environment Protection135
Disposal135
Within Europe135
Outside Europe135
Warranty136
Standards and Regulations136
Sprint 200136
Manufacturer136

Brand	LINET
Model	Sprint 200
Category	Medical Equipment
Language	English

LINET Sprint 200 User Manual

Table of Contents

Other manuals for LINET Sprint 200

Questions and Answers:

LINET Sprint 200 Specifications

Related product manuals