LS Industrial Systems SV-iV5 Series - Page 147

6. Function Description
6-79
z AIO_77 AO1 Gain setting
You can set the slope of output so that max. output of analog output can be 10V.
Key LCD Display Description
Initial Gain (Factory setting)
PROG
When pressing the [PROG] key, current output [%] to input
value is displayed on the first line and current setting gain
on the second line.
▲
If you want to adjust Gain to be 10V output at more than
200% on the first line, adjust gain to be 200.0% using [▲
(Up)] key.
ENT
After setting 102.00% Gain and pressing [ENT] key, it is
displayed and the changed gain is saved.
In examples for output setting of multi-function analog output, according to setting of Bias, Gain and the absolute
value at
-10 ~ 10V input, the output waveform varies as below.
100%
-100%
10V
-10V
AO Bias
100%
-100%
10V
-10V
Initail Value (Bias : 0%, Gain : 100%) Bias 30% setting
AO Bias
100%-100%
10V
-10V
50%-50%
AO Bias
100%-100%
10V
-10V
50%-50%
Gain 200% setting Absolute value setting
A
IO▶ AO1 Gain
77 100.0 %
A
IO▶
A
o1 30.0 %
77 Gain 100.0 %
A
IO▶
A
o1 30.0 %
77 Gain 200.0 %
A
IO▶ AO1 Gain
77 200.00 %