Lucent Technologies DDM-2000 OC-3 User Manual

SET-SECU 7of2Page SET-SECU
remoteTL150toupTL1,runtoprovisionedisportCITaIf
port.CITthatoncreatedbecanassociations
1:NOTE
thecommand,thisexecutingofresultaasIf porttype
from/tochangesvalueparameter’s cit to/from tl1 any,
terminatedbewillportspecifiedtheonsessionloginactive
andusersPrivilegedincludingoutloggeduser(s)theand
X.25theprovisioningfortrueissameTheusers.current
toport synch or synch.
2:NOTE
Once cit-1/2 tosetareports tl1 betoneedthey,
toreprovisioned cit usedbecanprogramCITthebefore
again.
(DTEportX2.5asynchronousthetoappliessameThe
typeportX.25thereprovisiontohavewillusertheAddress);
beto synch provisioning(by x25 andAddress,for synch
asusedbecanportX.25thebeforeType)Portfor
again.Synchronous
baudrate aremessagesTL1whichinbaudratetheSpecifies
are:parameterthisforvaluesThereceived/transmitted. 1200,
2400, 4800, 9600 and(Default), 19200.
ifonlyfor,promptedisparameterThis
porttype hasparameter
eitherofvaluethe tl1 or asynch.
NOTE:
thecommand,thisexecutingofresultaasIf baudrate
theonsessionloginactiveanychanges,valueparameter’s
out;loggeduser(s)theandterminatedbewillportspecified
users.currentandusersPrivilegedincluding
echo backechoedbetoneedsenteredcharacterthewhetherSpecifies
are:parameterthisforvaluesThenot.or enabled or,
disabled isvaluedefaultThe. enabled.
ifONLYfor,promptedisparameterThis
porttype parameter
ofvaluethehas tl1 or asynch.
sec inordisabled,enabled,issecuritywhetherdeterminesSecurity
Enablingport(s).DCCandCITspecifiedtheonstatelockout
topairpasswordandloginvalidaentertousersrequiressecurity
DCC-all.orCITspecifiedtheviasystemtheaccess
11-428 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English