Lucent Technologies DDM-2000 OC-3 User Manual

SET-SECU 7of3Page SET-SECU
areparameterthisforvaluesThe enabled, disabled (default
andvalue), lockout.
topermittedtypeuseronlythestate,lockoutinissecurityWhen
aisportCIT/DCCoutlockedthethroughsystemtheaccess
loginvalidawithevenusers,non-privilegedalluser;privileged
system.theaccesstoallowednotarepair,passwordand
1:NOTE
usersnon-privilegedstate,lockouttheinissecurityWhen
arebutdatabase,login/passwordthefromdeletednotare
activeExistingsystem.theaccessingfromblockedsimply
notareusersnon-privilegedbyinitiatedsessionslogin
tosetissecurityifdropped)notis,(thataffected lockout.
2:NOTE
toequalisparameterAddresstheIf cit-1 or cit-2 and
toequalisPorttype tl1 toequalisAddressor, x25,
isSecurity enabled thisresult,aAsautomatically.
theinshownotwillandforpromptednotisparameter
message.confirmation
to sessioninactiveanbeforeminutes,intime,thespecifiesTimeout
valueahasThisterminated.automaticallyisportspecifiedtheon
minutes.15ofvaluedefaultaandminutes120to0fromranging
function.timeoutthedisablewill0toparameterthisSetting
NOTE:
isAddressofvaluetheIf x25 isPorttypeand synch then,
parameter.thisforpromptedbenotwilluserthe
OC-3DDM-2000 2000February2Issue 11-429

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English