SET-STATE-EC1 3of1Page SET-STATE-EC1
NAME
StatePortEC-1Setset-state-ec1:
FORMATINPUT
set-state-ec1:
Address
:ps=
PrimaryState
;
DESCRIPTION
iscommandThisports.EC-1speedlowtheofstatethesetscommandThis
port.specifiedafromfailuressignalofmonitoringtheoffandonturntoused
are:parametersinputThe
Address
port(s).EC-1theidentifiesAddress
Addresses:Valid all,a,b,c
ps followingtheofonehavemaywhichstateporttheisPrimaryState
values:
auto theatsignalgoodformonitoredbetostateSet
port.specified
nmon monitored.nottostatememorySet
NOTE:
theinisportaIf nmon thetoreturnedbemustitstate, auto usingstate,
becanportthatwithassociatedpackscircuitanybeforecommand,this
thebylistequipmentthefromremoved upd command.
theintoputbetoisthatportEC-1anIf nmon STS-1isstate
thepacks,circuitMXRVOwithequippedunitfunctionatocross-connected
theinputbealsoshouldportEC-1thatwithinchannelsVT1.5 nmon state.
ofstateprimaryaIf nmon displayed:bewillmessagefollowingtheentered,is
)s(troP*/
sserdda
/*etatssihtnidemralaroderotinomebtonlliw
11-434 2000February2Issue OC-3DDM-2000
To Next Page
Loading...
Need help?
General
