Lucent Technologies DDM-2000 OC-3 User Manual

NTP-003: Acceptance 363-206-285
Page4of4 Issue3,June2001
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
DLP-5397. Test ED-8C733-30, G7 fan shelf, if installed.
8.
NOTE:
A craft interface terminal (CIT) is required to access the
optional features of the DDM-2000 OC-3 Multiplexer. Refer
to the Commands and Reports section and use the
rtrv-( ) commands to determine the existing options.
DLP-512Activate optional features that you require at this time.
9. After each shelf in the network has been tested, the DDM-2000
will be ready for end-to-end testing.
[Acceptance: NTP-004]
DLP-539
DLP-512

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English