Lucent Technologies DDM-2000 OC-3 User Manual

363-206-285 Circuit Order: NTP-039
Issue 2, February 2000 Page 9 of 32
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED . . . . .FOR DETAILS, GO TO
14.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 2 only, use the switch-line:main:pri=manual
command to switch to the service (MAIN 1) line (main-1 OLIU
active). (See Figure 4.)
Figure 4 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English