NTP-039: Circuit Order 363-206-285
Page 16 of 32 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
DO ITEMS BELOW IN ORDER LISTED. . . . . FOR DETAILS, GO TO
21.
NOTE:
Wait until FAULT LED on MAIN OLIU extinguishes before
attempting switch.
At Node 1 only, use the switch-line:main:pri=manual
command to switch service to the service line (main-1 OLIU
active at Node 1). (See Figure 11.)
Figure 11 – DDM-2000 OC-3 Drop or Add/Drop Network to Ring Upgrade
To Next Page
Loading...
