Lucent Technologies DDM-2000 OC-3 - Page 2060

TAP-122: Trouble Clearing 363-206-285
Page 4 of 4 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
20. !
CAUTION:
Replacing the SYSCTL involves updating the internal memory on the
circuit pack.
Replace the SYSCTL or OHCTL.
Reference: DLP-523
21. Repeat program installation procedure.
Reference: DLP-532
22. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
23. If you need technical assistance, notify your supervisor, your local technical
support organization, or call Lucent Technologies RTAC, per local operating
instructions.
24. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
DLP-523
DLP-532