Lucent Technologies DDM-2000 OC-3 User Manual

DLP-523: Detailed Level Procedure 363-206-285
Page 29 of 30 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
56. Remove old IMA LAN and install replacement IMA LAN in required slot of
LOW SPEED group.
57. Connect cable to RJ-45 connector on BBF9 IMA LAN or optical cable to
optical connector on BBF10 IMA LAN.
Response: FAULT LED on IMA LAN circuit pack lights and may
remain lighted for about 40 seconds and then goes off.
58. STOP. YOU HAVE COMPLETED THIS PROCEDURE.

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English