Lucent Technologies DDM-2000 OC-3 - Page 2256

DLP-528: Detailed Level Procedure 363-206-285
Page 8 of 12 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
shelf. If CIT bay mult cabling is connected to this shelf verify that it is
terminated.
Exit TERM (Alt-F2) and repeat this procedure from Step 23.
28. Enter the shelf number for the local shelf being used for new program
download.
Response: PC responds with:
29.
NOTE:
After the system prompt (<), the system will respond normally to
commands entered. The Commands and Reports section of this manual
gives a description of the commands.
Use rtrv-map-network command to retrieve the name (tid)oftheremote
shelf having new program installed.
login<
password<
/*************************************
**
**
* Lucent Technologies *
* DDM-2000 OC-3 Multiplexer *
**
* Release a.b.c *
**
*************************************/
.
.
.
TID date time
M rtrv-alm:all COMPLD
/* Active Alarms and Status Report
<