DLP-544: Detailed Level Procedure 363-206-285
Page 3 of 4 Issue 2, February 2000
DDM-2000 OC-3 MULTIPLEXER
16. Replace the 22D-U/22G-U/22G2-U/22G3-U/22G4-U OLIU circuit pack that
failed the test.
Reference: DLP-518
17. Repeat this procedure for the 22D-U/22G-U/22G2-U/22G3-U/22G4-U OLIU
circuit pack that failed.
18. Trouble may be in the LGX cross-connections or the shelf backplane. If other
alarms or trouble indications are present, refer to Trouble Clearing: IXL-001
to isolate the trouble. If no alarms or indications are present and a CIT is
available, use the RETRIEVE commands (for example, rtrv-alm:,
rtrv-hsty:, etc.) to check for other trouble indications.
19. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
DLP-518
To Next Page
Loading...
Need help?
General
