363-206-285 Detailed Level Procedure: DLP-551
Issue 2, February 2000 Page 3 of 4
DDM-2000 OC-3 MULTIPLEXER
16. Depress the ACO/TST pushbutton on the User Panel and verify that all LEDs
on the User Panel light. Continue to depress the ACO/TST pushbutton and
the release number of the software installed in the shelf should be displayed in
the SYSCTL window.
17. Use CIT and verify that you can log into the shelf. If you cannot establish a
session, check cable connections.
Reference: DLP-521
18. Service may now be restored to the shelf.
19. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
DLP-521
To Next Page
Loading...