Lucent Technologies DDM-2000 OC-3 - Page 26

Tables
xxvi Issue 3 June 2001
8-9 Ring STS-1 Cross-Connections (Hub/Drop) 8-34
8-10 Ring STS-1 Cross-Connections (Pass-Through) 8-35
8-11 Ring STS-1 Cross-Connections
(Drop and Continue) 8-35
8-12 Ring STS-1 Cross-Connections (Hairpin) 8-36
8-13 Ring VT1.5 Cross-Connections (Termination/Drop) 8-36
8-14 Ring VT1.5 Cross-Connections (Hub/Drop) 8-36
8-15 Ring VT1.5 Cross-Connections (OC-1 Hub/Drop) 8-37
8-16 Ring VT1.5 Cross-Connections
(Drop and Continue) 8-37
8-17 Ring VT1.5 Cross-Connections (Pass-Through) 8-38
8-18 Ring VT1.5 Cross-Connections (Locked) 8-38
8-19 Ring VT1.5 Cross Connections (Hairpin) 8-39
8-20 Ring STS-3c Cross Connections 8-39
8-21 Parameters Provisionable via Hardware Switches 8-70
8-22 Parameters Provisionable via the CIT 8-71
9 Maintenance Description
9-1 DDM-2000 OC-3 In-Service Software Upgrade
Compatibility (Note) 9-9
9-2 DDM-2000 OC-3 and OC-12 Software Compatibility
(Note) 9-10
9-3 DDM-2000 OC-3 and DDM-2000 FiberReach
Software Compatibility 9-11
9-4 DDM-2000 OC-3 Multiplexer Dual Ring
Interworking Software Compatibility 9-11
9-5 DS3 Performance Monitoring Enabling 9-53
9-6 DS3 Performance Monitoring (PM) Modes (Note) 9-54
10 Technical Specifications
10-1 Transmission Interface Standards 10-1
10-2 BBF10 LAN Optical Characteristics 10-10
10-3 DS3 Interface Modes 10-13
10-4 Enhanced DS3 Performance Monitoring Modes 10-13
10-5 22D-U OLIU Specifications 10-27