Lucent Technologies DDM-2000 OC-3 User Manual

DLT-CRS-VT1 5of1Page DLT-CRS-VT1
NAME
VT1.5Cross-ConnectionDeletedlt-crs-vt1:
FORMATINPUT
dlt-crs-vt1: Address1 , Address2 [:cct=CrsType];
DESCRIPTION
!
CAUTION:
service.affectmaycommandthisofExecution
OC-3DDM-2000awithincross-connectionssignalVT1.5deletescommandThis
system.
NOTE:
cross-connecttheifexecutedbeonlycancommandthissystems,linearIn
(manualtosetismode crs= manual thebysetas) set-ne command.
are:parametersinputThe
Address1 and Address2
oneorchannels,VT1.5twotheofaddressestheareThese
the(withinDS1"internal"orDS1oneandchannelVT1.5
port,later)and13.0ReleaseOC-3inpackcircuitTMUXBBG20
ringIndeleted.betoarecross-connectionsexistingwhere
theusingbydeletedareconnectionspass-throughapplications,
foraddresssame
Address1 and Address2 .
Addresses:LinearValid
{m,c}-{1-3,all}-{1-7,all}-{1-4,all},
{a,b}-{1-2}-{1-7,all}-{1-4,all},
{a,b,c}-{1-7,all}-{1-4,all}
Addresses:RingValid
m-{1-3,all}-{1-7,all}-{1-4,all},
{a,b,c}-{1-7,all}-{1-4,all},
a-{1,2,all}-{1-7,all}-{1-4,all},
b-{1,2,all}-{1-7,all}-{1-4,all},
c-{1-3,all}-{1-7,all}-{1-4,all}
supports15.0)Release(OC-3packcircuit(BBF6)T1EXTThe
portonlyBBF6,aonportsaddressingWhenports.T1two
Specifyingvalid.are2and1numbers all and1portsselects
only.2
OC-3DDM-2000 2000February2Issue 11-55

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English