Lucent Technologies DDM-2000 OC-3 User Manual

DLT-CRS-VT1 5of2Page DLT-CRS-VT1
MaininOLIUs29-typeor24-typewithequippedisshelftheIf
are:AddressesunitMainOC-12validslots,unit
m-{1-12}-{1-7,all}-{1-4,all}
cct are:valuesvalidThetype.cross-connectionspecifiesCrsType
twoway add/drop,toapplycross-connectionsTwo-way
theisTwo-wayconfigurations.ring0x1andhairpin,
value.default
dc ringdualsupportconnectionscontinueandDrop
applications.
locked nonpath-switchedsupportcross-connectionsLocked
arecross-connectionsLockedapplications.dropDS1
equippedisaddressunitfunctiontheifallowedonly
13.0Release(inTMUXBBG20orMXRVOthewith
interface.later)and
valuetheincludesaddresstheIf all forvaluethe, cct
theofrangethewithincross-connectioneverytoapplies
addresses.
The Address1 , Address2 and, CrsType existinganmatchmustparameters
thewithcompletewillcommandtheofexecutionorcross-connectionVT1.5
message:following
tsixetonseodnoitcennoc-ssorc5.1TVdeificepsehT*/
/*.deteledebtonnacdna
(defaulttosetismodecross-connecttheifsystems,linearIn crs= default as)
thebyprovisioned set-ne thewithdeniedbewillcommandthiscommand,
message:following
SVNS
/*etatSdilaVnitoN,sutatS*/
snoitcennoc-ssorctluafedrofdenoisivorpmetsyS*/
/*.dnammocen-tesehtniretemarapedoMsrCehtyb
11-56 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English