Lucent Technologies DDM-2000 OC-3 User Manual

INIT-SYS 7of5Page INIT-SYS
(TID)nameSystem
set-ne
PMN
set-attr-alm
13.0ReleaseOC-3In—IdShelfandIdNEId,Site
IdNEandIdSitethereleases,TARPlaterand
notarethereforeandavailable,benotwillparameters
command.thisbyaffected
set-ne
13.0ReleaseOC-3In—selectionCO/RTandTBOS
benotwillparameterTBOSthereleases,TARPlater
thisbyaffectedbenotwillitthereforeandavailable,
command.
set-ne
DCConsettingsUserSide/NetworkSide
LANIAOChannelDCC
set-fecom
addresstheenteringparameters,initializingtoadditionIn all will
failureForalarms.anddatamonitoringperformanceallclear
alarmstheinitialized,areparametersafterexiststillthatconditions
thisbyaffectednotareparametersdateandTimeredeclared.bewill
command.
anExecuting init-sys:sysctl thesetwillequippedpacksTGSnowith
values:defaulttoparametersfollowing
OptionsFeature
and13.0ReleaseOC-3In—(DSNE)ElementNetworkServicesDirectory
theofpartbenotwillparameterDSNEthereleases,TARPlater set-ne
thisbyaffectedbenotwillthereforeandparameters,provisioning
command.
(TID)nameSystem
PMN
TARPlaterand13.0ReleaseOC-3In—IdShelfandIdNEId,Site
theofpartbenotwillparametersIdNEandIdSitethereleases, set-ne
thisbyaffectedbenotwillthereforeandparameters,provisioning
command.
thereleases,TARPlaterand13.0ReleaseOC-3In—AddressTBOS
theofpartbenotwillparameterAddressTBOS set-ne provisioning
command.thisbyaffectedbenotwillthereforeandparameters,
11-130 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English