Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-STATE-PATH 3of1Page RTRV-STATE-PATH
NAME
PathStateRetrievertrv-state-path:
FORMATINPUT
rtrv-state-path[: Address ];
DESCRIPTION
signalspath-protectedforinformationstatepathsignaldisplayscommandThis
transmittedtheofwhichdetermineTo(NE).elementnetworktheatdropped
usealsotonecessarybemayitactive,arefiberthetooutgoingchannelsring
the rtrv-state-eqpt systems.remotealloncommand
reported.isprotectedpathisthatapplicationAny
NOTE:
duringexample,(fortypespackdifferentwithequippedare2and1slotsIf
timetheatconsiderediswhatfordataincludewillreporttheupgrade),an
type.packsystemvalidtheas
reported.isprotectedpathisthatapplicationAny
is:parameterinputThe
Address The address Thepath.STS-1orVT1.5connectedanyis
isdefault all system.theinpathsallfor
Addresses:VT1.5OC-3Valid
{m1,m2}-{1-3,all}-{1-7,all}-{1-4,all}all,
OLIUs:OC-3forAddressesSTS-1Valid
{m1,m2}-{1-3,all}all,
OLIUs:27-typeforAddressesVT1.5Valid
{m}{1,2}-{1,2}-{1-7,all}-{1-4,all}
{a,b,c}{1,2}-{1,2}-{1-7,all}-{1-4,all}
only)OLIUs(27G2-U
OLIUs:27-typeforAddressesSTS-1Valid
{m}{1,2}-{1,2}
{a,b,c}{1,2}-{1,2}
only)OLIUs(27G2-U
OLIUs:26G2-UforAddressesVT1.5Valid
{a,b,c}{1,2}-1-{1-7,all}-{1-4,all}
later)and13.0(Release
OLIUs:26G2-UforAddressesSTS-1Valid
{a,b,c}{1,2}-1 later)and13.0(Release
11-298 2000February2Issue OC-3DDM-2000

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English