Lucent Technologies DDM-2000 OC-3 User Manual

RTRV-STATE-PATH 3of2Page RTRV-STATE-PATH
with(starting29-typeor24-typewithequippedisshelftheIf
VT1.5validtheslots,unitMainitsinOLIUs15.0)ReleaseOC-3
are:addressesMain
m{1,2}-{1-12,all}-{1-7,all}-{1-4,all}
are:addressesMainSTS-1validThe
m{1,2}-{1-12,all}
follows:asappearsreportoutputThe
tropeRetatShctiwSnoitcetorPhtaP*/
=================================================== ===========
----------2gniR---------------------1gniR---------- -
noitidnoCSPAtcAsserddAnoitidnoCSPAtcAsserddA
=================================================== ===========
noitidnocxsserddanoitidnocxsserdda
noitidnocxsserddanoitidnocxsserdda
......
......
......
/*
are:parametersoutputThe
Address The address slotsMain(ifSTS3cSTS-1,anbecould
path.VT1.5orOLIUs),29G-Uor24G-Uwithequippedare
2Ringand1RingthebothdisplaysalwaysreportThe
addresses.
Act path1RingassociatedthewhetherindicatescolumnThis
fn-main-1orlocalinto[receivemain-1)localinto(receive
(receivepath2Ringorlater)]and11.0(Release{a,b,c}-1
ormain-2localinto[receivepath2Ringmain-2)localinto
active.islater)]and11.0(Releasefn-{a,b,c}-2
following:theofonecontainmaycolumnThis
Y anddropordrop,asprovisionedispathThe
protection(pathactiveissidethisandcontinue,
allowed).isswitching
(blank) anddropordrop,asprovisionedispathThe
standby.inissidethisandcontinue,
OC-3DDM-2000 2000February2Issue 11-299

Lucent Technologies DDM-2000 OC-3 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-3
Category	Multiplexer
Language	English