Section 4 – TRANSPORTATION Mini-Crawler Crane M A E D A
4-140 3/2019 MC305C-3
Cautions on Loading Machine
WARNING! Select flat and solid ground for
loading/unloading the machine. Keep
sufficient distance from the shoulders.
Load the machine to the specified position on
the trailer and secure the machine with the
following procedure.
1. Stop the engine and remove the key of the
starter switch.
2. Provide a square timber in front and back of
the rubber tracks to prevent the machine
from moving during transportation. Secure
the machine with chain or wire cable.
Secure it surely, especially not to let it slip
to the side.
Fig. 4-404
Cautions During Transportation
WARNING! Take road width, height, and
weight into consideration in determining the
transportation route.
If there are applicable local laws and regulations,
observe these laws and regulations for safe
transportation.
If not, contact us or our sales service agency.