M A E D A Mini-Crawler Crane Section 5 – INSPECTION
3/2019 MC305C-3 5-33
Post-Start Inspection - After
Starting Engine
Check Horn
1. Turn the starter switch to the "ON" position
and check the followings.
Fig. 5-49
2. Press the horn switch to verify that the horn
sounds.
Fig. 5-50
Check Working Lights
1. Turn the starter switch to the "ON" position
and check the followings.
Fig. 5-51
2. Push the working light switch in the back and
verify that the pilot lamp of the switch section
and the working light on front of the machine
lights up.
Fig. 5-52
Check Fuse Box for Damage
WARNING! If fuses are brown frequently or if
you find the trace of a short circuit created in
the electrical wiring, be sure to find the cause
and fix the problem.
Check the fuse at the lower section of the
instrument panel for damage and meltdown and if
the fuse of specified capacity is being used.
Fig. 5-53
To Next Page
Loading...
