Operating elements for crane operation
9.1 Overview of the operating elements
Operating Manual GMK6300L 3 112 xxx en 9 - 53
xx.xx.xxxx
H
Opposite means: on the side of the carrier opposite to the operator when
looking at the control unit.
Left and right mean: to the left or the right of the control unit.
Outrigger button
s
1 Operate left outrigger à p. 9 - 68
2 Operate left outrigger, opposite
à p. 9 - 68
3 Operate right outrigger
à p. 9 - 68
4 Operate right outrigger, opposite
à p. 9 - 68
5 Inclination indicator
Raise axle display
à p. 9 - 70
à p. 9 - 71
6 Additional function F1 on/Position lights for
indicator lamps
à p. 9 - 69
7 Additional function F2 Select axle pairs
à p. 9 - 71
8 Additional function F3 Select axle pairs
à p. 9 - 71
9 Additional function F4 Menu selection
– Outriggers
or
– Raise axle
à p. 9 - 71
10 In the Outrigger menu
– Retract all outrigger cylinders
In the Raise axle menu
– Raise the axles
à p. 9 - 69
à p. 9 - 71
11 Pre-select high-speed mode
à p. 9 - 68
12 Switching over the measuring range
à p. 9 - 70
13 START engine
14 In the Outrigger menu
– Extend all outrigger cylinders
In the Raise axle menu
– Lower the axles
à p. 9 - 69
à p. 9 - 71
15 – Pre-select normal speed
– Automatic alignment
(as additional function F1)
à p. 9 - 68
à p. 9 - 69
16 Horn
17 STOP engine