Manitowoc Grove TMS9000-2 Series - Operating the Camera; Switching the Boom Position Indicator Light (Optional Equipment) on and off

Grove Published 02-21-2019, Control # 611-05 3-91
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
3
Changing values
• Select and confirm the symbol for the relevant function
speed– symbol red.
• Change the value using switch (2, (Figure 3-99)) or the
buttons (3).
To cancel the input – press button (1) once.
• Confirm the changed values – press switch (2) or button
(4) once. The changed values for the power unit are
applied.
Operating the camera
Switching the camera
Select and confirm the symbol to change the camera.
Switching the boom position indicator light
(optional equipment) on and off
On the main menu select item 1 ((Figure 3-101)).
Switching on: Select symbol (1, (Figure 3-102)) and confirm.
Switching off: Select symbol (2) and confirm.
1: Camera 1
2: Camera 2
3: Camera 1 and 2
FIGURE 3-99
8854-283
FIGURE 3-100
8882-27
FIGURE 3-101
8854-36b
1
FIGURE 3-102
9060-1
9060
1
2