OPERATING CONTROLS AND INDICATORS TMS9000-2 OPERATOR MANUAL
3-138 Published 02-21-2019, Control # 611-05
ECONOMY MODE
In Economy (ECO) Mode the crane software will control the
throttle command to the engine over J1939. Based on the
state of the crane and inputs from the throttle pedal and the
Increment/Decrement Throttle Switch, ECO mode will
reduce the throttle command when crane functions are not
being used. This is intended to encourage the operator to run
crane functions with enough power provided by the engine
and reduce the fuel consumption when the crane is not doing
any work.
To Next Page
Loading...
Need help?
General
