EasyManuals Logo

Manitowoc Grove TMS9000-2 Series User Manual

Manitowoc Grove TMS9000-2 Series
430 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
Grove Published 02-21-2019, Control # 611-05 3-109
TMS9000-2 OPERATOR MANUAL OPERATING CONTROLS AND INDICATORS
3
Table 3-1 System Components
Table 3-2 Operating Conditions
Item Component (Figure 3-167) Description
1 Remote Control (transmitter)
The remote control communicates with the receiver to control the crane
functions identified in this publication.
Powered by a 3.2Ah Lithium-Po rechargeable battery (4b)
Stored in a pocket on the inside of the carrier cab door
2 Receiver Module
Communicates with the remote control and the CCS (crane control system)
over the CAN network.
Mounted on the cab wall behind the drivers seat
3 Battery Charger
Charges the batteries (quantity 2) suppled with the remote control. The
charger is active whether the carrier engine is running or off.
Mounted on the cab wall behind the drivers seat
The charger lights (3a) indicate the following:
Four red lights = CHARGING
Three green lights = FULLY CHARGED
Working range Approximately 30 m (100 ft) depending on obstructions and environment
Battery operating time Approximately 10 hours
Operating temperature -20°C to 70°C (-4°F to 158°F)
Storage temperature -40°C to 75°C (-40°F to 167°F)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitowoc Grove TMS9000-2 Series and is the answer not in the manual?

Manitowoc Grove TMS9000-2 Series Specifications

General IconGeneral
BrandManitowoc
ModelGrove TMS9000-2 Series
CategoryConstruction Equipment
LanguageEnglish

Related product manuals