Meggitt VM600 User Manual

10 - 8 VM600 networking manual MAVM600-NET/E
Edition 9 - February 2018
PROFINET configuration files
SETTING UP A PROFINET CONNECTION (CPUM SW VERSION 081 OR LATER)
For PROFINET communications, MPC4 registers must be defined as shown in Table 10-1
and AMC8 registers must be defined as shown in Table 10-2, as these tables (PROFINET
slot definitions) correspond to the underlying PROFINET slot data structures defined in a
GSDML file (see 10.5 GSDML files).
10.6.1.2 profinet.cfg file
Figure 10-6 shows a typical profinet.cfg configuration file. This configuration file defines
the device name and gateway used for PROFINET communications.
Table 10-1: MPC4 register definition format
Type of channel Required register format
Channel
Output1 Value, FSD, Status (Invalid, A+, A−, D+, D−, SOK)
Output2 Value, FSD, Status (Invalid, A+, A−, D+, D−, SOK)
Dual channel Value, FSD, Status (Invalid, A+, A−, D+, D−, SOK)
Speed Value, Status (Invalid, A+, A−, SOK)
Basic and advanced
functions
BF1 to BF8, AF1 to AF4
Common status
CMF, COF, CPR, CIE, CA, CD, CSOL, CTL, CTOR, CDSE, CISE,
CCME, SL, TM, DBP, AR
Card status MCR (MPC configuration running)
Table 10-2: AMC8 register definition format
Type of channel Required register format
Channel
Output1 Value, FSD, Status (A−, A+, D−, D+, GOKF, ADERR,
ADSTBY, ADLOCK, ADTXERR, ADCFGERR, BITF, NOSPL, OKF,
LINERR, JERR)
Multiple channel
Value, FSD, Status (A−, A+, D−, D+, GOKF, ADERR, ADSTBY,
ADLOCK, ADTXERR, ADCFGERR, BITF, NOSPL, OKF, LINERR,
JERR)
Basic function BF1 to BF16
Advanced function AF1 to AF8
Channel and multiple
channel alarm used
A− used, A+ used, D− used, D+ used
Card status CSANR, CSSL, CSDB, CSAR
Figure 10-6: A typical profinet.cfg file

Meggitt VM600 Specifications

General

Brand	Meggitt
Model	VM600
Category	Measuring Instruments
Language	English