VM600 networking manual MAVM600-NET/E 2 - 7
Edition 9 - February 2018
CPUM card configurations
CPUM CARD DIRECTORY STRUCTURE AND CONFIGURATION FILES
2.6.2 Customer-specific configurations
When specified, a CPUM card is supplied with a ‘customer-specific’ configuration that
corresponds to the configuration agreed with Meggitt SA and specified using an ordering
number (PNR) and particular option code.
In such cases, the CPUM card is typically pre-loaded with the ‘customer-specific’
configuration before shipping.
2.6.3 Changing configurations
The CPUM Configurator software can be used to download a configuration from a CPUM
card or upload a configuration to a CPUM card (see 6 CPUM Configurator).
Accordingly, this allows the configuration running on a CPUM card to be modified as required.
For example, by downloading, modifying and then uploading the configuration or by
uploading a new different configuration.
NOTE: It is strongly recommended to use the CPUM Configurator software to make a
backup copy of the configuration running on a CPUM card.
NOTE: A backup copy of the configuration running on a CPUM card is especially important
if you are going to make changes to the supplied configuration yourself, as you can
revert to the backup copy if you experience problems.
NOTE: If required, an archive copy of the configuration pre-loaded on a CPUM card before
shipping can be obtained from Meggitt SA by contacting the Customer support
department with customer-specific information such as the Meggitt SA order
number, customer order number and/or ordering number (PNR) and particular
option code for the CPUM card. See 12.1 Contacting us.
To Next Page
Loading...
Need help?
General
