Meggitt VM600 - About the Version.txt File; Example Version.txt File

3 - 4 VM600 networking manual MAVM600-NET/E
Edition 9 - February 2018
Identifying the firmware version of a CPUM card
SERIAL COMMUNICATIONS WITH A VM600 RACK
2- At the command prompt (/usr/user # ), type ls, then press ENTER to continue. For
example:
/usr/user # ls
The list command lists the files in the current working directory ( /usr/user ) are
listed, including the version.txt file which contains the firmware version information
for a CPUM card.
3- At the command prompt (/usr/user # ), type more version.txt, then press ENTER
to continue. For example:
/usr/user # more version.txt
The more command displays the contents of the specified text file one screen at a time.
If required, pressing ENTER or SPACEBAR displays the next n lines of text.
Alternatively, the cat command can be used to display the contents of a file without
pausing.
3.3.1 About the version.txt file
3.3.1.1 Example version.txt file
CPU-M : 200-595-075-HHh
CF : 209-595-300-075
Software version at last startup
--------------------------------
SW_VER : 0.7;5
SW : 209-595-300-075
Individual SW checksums
-----------------------
xmcsrv 365156814
mbsrv 3104950782
rpcamcsrv 1060545938
rpccmcsrv 49297480
rpccpusrv 1030630127
rpcmpcsrv 1406217733
vmesrv 1903091
testfp 2988981983
vmetest 1047897882
trigwdog 3766606088
setboot 2042170770
launcher 2954264382