ii VM600 networking manual MAVM600-NET/E
Edition 9 - February 2018
REVISION RECORD SHEET
Edition
Date
of issue
Written by /
modified by
Description Signature
1 07.10.03 R. Meyer Original edition RM
2 31.03.06 N. Parker Update to reflect new corporate identity NP
3 13.05.09 S. Trono
Updated for Windows XP.
Added AMC8 card support.
ST
4 02.09.2010 Peter Ward
Updated to reflect new improved Modbus support that is
available for CPUM cards running firmware version 071 or
later. This specifically affects the AMC8 and MPC4 cards
and their register definition tables, which have been moved
to appendices.
Also updated to reflect new PROFINET support that is
available for CPUM cards running firmware version 801.
PW
5 24.11.2010 Peter Ward Minor corrections PW
6 15.03.2012 Peter Ward
Corrections to Table A-2 on page A-4.
Updated in accordance with the latest Meggitt brand
guidelines.
PW
7 30.06.2014 Peter Ward
Added additional information on the dynamic host
configuration protocol (DHCP).
Corrected the default Modbus baud rate in
8.4.2 Communications parameters for the VM600.
Updated with the latest networking information, including
the use of CPUM Configurator software as supported by
CPUM firmware version 075, and terminal sessions (with
PuTTY and Midnight Commander). This required the
restructuring of the first seven chapters of the manual.
PW
8 08.05.2015 Peter Ward
Updated the table in the Preface to include additional
information on CPUM cards (see Affected products).
Updated to reflect that the CPUM Configurator software is
now included with VM600 MPSx software version 2.7 or
later (see 6 CPUM Configurator).
Clarified and corrected the introductory text on PuTTY
(see 1.3.2.1 PuTTY).
Updated incorrect cross-reference links and corrected
typos throughout the text.
PW
9 14.02.2018 Peter Ward
Added a statement that Meggitt SA product certifications
and warranties are valid only for products purchased
directly from Meggitt SA or an authorised distributor
(see IMPORTANT NOTICES).
Updated the table in the Preface to include additional
information on CPUM cards (see Affected products).
Updated to reflect changes to the CPUM Configurator
software included with VM600 MPSx 2.7 build 012 or later
(see 6 CPUM Configurator).
Updated to include CPUM firmware version 081 which adds
support for PROFINET (see 2 CPUM card directory
structure and configuration files and 10 Setting up a
PROFINET connection).
Added end-of-life product disposal information
(see 11 End-of-life product disposal).
Updated the Energy product return procedure and form to
be consistent with the Meggitt Vibro-Meter
®
website
(see 12 Service and support).
PW
To Next Page
Loading...
Need help?
General
