104 Panel Functions
_________________________________________________________________________________________
_________________________________________________________________________________________
Microplex logiJET TC8 Edition 1.2
Print another Testpage
operation:
7. Start the printing of the second Testpage at the Engine Menu
logiJET TC8 \ Engine \ Slip Menu \ Testpage DIN A4
##)
The printout looks something like this (simplified):
Second testpage utilizing the new slip correction
8. Put the sheet of an A4
##)
paper onto the Test pattern and check if the bar is
just as long as the paper width.
If the test result does not comply your requirements, please repeat the
working step 1 to 8.
This bar was printed
with your new slip
correction setting.
If the slip correction
setting was done
correctly, the bar is just
as long as the A4
##)
paper width.
To Next Page
Loading...
