– 4.33 –
[Assembling procedure]
• Confirm the precautions (page 4.31) before replace a heater.
1) Put the wire heater into the slot while aligning it to the edge of the protection tube.
2) Put the folding section into the slot while creating a semicircle.
• Do not fold the wireheater rapidly, or it may cause disconnection.
Printheater
Preheater
Align to edge.
Align to edge.
Do not fold.
Wire Heater
130SL, 130SPII : Wire Heater130SP-R2
160SP : Wire Heater160SP-R2
130SL, 130SPII: Wire Heater130SP-R1
160SP: Wire Heater160SP-R1
Do not fold.
75SPII : Wire Heater R75
To Next Page
Loading...
Need help?
General