MIMAKI JV3-160SP User Manual

– 5.44 –
b. [HEAT LED] : Check of the HeatLED-ON/OFF
1) Select the “HEAT LED” using the
or
key.
Press the
ENTER
key.
2) Select the heater (Pre/Print) using the
or
key.
Press the
or key to change ON/OFF.
3) Press the
key to exit from the
function.
c. [CONSTANT LED] : Check of the ConstantLED-ON/OFF
1) Select the “CONSTANT LED” using the
or key.
Press the
ENTER
key.
2) Select the heater (Pre/Print) using the
or
key.
Press the
or key to change ON/OFF.
3) Press the
key to exit from the
function.
# HEATER TEST
HEAT LED < ent >
Print Pre
OFF OFF
# HEATER TEST
CONSTANT LED < ent >
Print Pre
OFF OFF

MIMAKI JV3-160SP Specifications

General

Brand	MIMAKI
Model	JV3-160SP
Category	Plotter
Language	English