– 4.12 –
[Cautions of head replacing]
• When attaching the head which used cleaning fluid for S-head replacement to
the plotter, be careful to not put any ink and cleaning liquid on the head
connector (FPC connection part, FPC, etc.)
1) Be careful not to leak ink from the
damper.
(Wipe it by bem cotton to prevent dirt.)
2) Be careful not to running ink from FPC
into inside of the connector when taking
off / in the damper.
(Do not to put any ink on connector and
FPC, etc.)
To Next Page
Loading...
Need help?
General